Summer sale! Cleaning out the shop… more to follow WBS-L – 10-060 : PPM Meter Driver WBS-L – 14-260 : Mic-Preamp and HP Filter WBS-L – 4-109 : Amplifier…
Summer sale! Cleaning out the shop… more to follow WBS-L – 10-060 : PPM Meter Driver WBS-L – 14-260 : Mic-Preamp and HP Filter WBS-L – 4-109 : Amplifier…
I most certainly had a busy “reading week”. It started with finishing up a job My brother Mike started. Moving 7 pallets of equipment from my moms garage in Saskatoon. Followed by great visits with Family and friends. I’m…
I was reading http://professional-sound.com/ (like I do every month plug plug) and saw Joels lovely new studio and Neve Console. Front an centre I was happy to see the set of WBS pre-amps I wired up for him a few years…
All things considered the build is going well. The leads from the supplied output transformer could have been longer… and if anyone knows a good way to remove paint for grounding posts let me know :-)
Due to popular demand: Introducing: the Ward-Beck Systems RTO-214 Rack Mount Chassis APKaudio and Ward-Beck Systems are excited to announce a new lineup of retro products. Started with possibly the most requested and in demand item the WBSps.ca has needed: a 2RU…
Loading up the studio on the last night got some AA stickers with numbers to follow! Most of this stuff is for sale with the exception of a few things… Rack 1 http://audioaholics.com/item/267 http://audioaholics.com/item/137 http://audioaholics.com/item/36 Rack 2 http://audioaholics.com/item/99 http://audioaholics.com/item/49 http://audioaholics.com/item/139…
Working on the mobile patching system.
Congrats to Kevin Park and the Lacquer channel team for getting the Neumann VMS70 back in the game. A fantastic project to have been a part of! We recapped the entire audio electronics for Kevin before he had lathe aficionado…
had a brief test fit this evening…
Boy am I excited to have been a part of a restoration of a Neumann VMS-70 Cutting lathe. It is currently being setup at Tonronto’s Lacquer Channel and undergoing calibration. I have more pictures to post as we’re done a complete…
I recently got a bunch of blank switch buttons. I wanted some new CH ON Buttons in APK orange… this is what I came up with.
We Built some 24 Channel snakes from some re-claimed Blenden Bundles. All the EDACs were de-pinned and re-inserted into a 90 pin housing. The other end has been cut to length and re-prepped into various configurations. Dave got some…
There is nothing like this meter on the market. It’s nice to have on the bench, excited to get them installed!
The demands only grow as the systems do. Red – XLRF – TRS Blue – XLRM – TRS Green – ground lift Yellow – polarity inverter Violet – XLRM – XLRM Black Expando – XLRF – XLRF Orange – XLR…
Does anyone know where I can get these mini bulbs? Looking for Bulbs for a Studer A80 Ready and Rec lights so small